|
The Calpe H-1600 Semi-Automatic
Lathe is capable of turning all types of wood spindles.
It is equipped with a single hydraulic control tracer unit, a hydraulic
controlled tailstock, and hydraulic control of the carriage
advance/return. Additional sizes are available, priced upon request.
FEATURES
Distance between
Centers...................................................................................1600
mm (63”)
Maximum Turning
Diameter.................................................................................
430 mm (17”)
Maximum Square Size
.........................................................................................280
mm (11”)
Main Head Speed .................................850, 1950, 3000, 4900,
1700 2450, 3900, 6000 RPM
Main Shaft Morse
Cone...................................................................................................
No. 4
Main Head Motor w/Brake
.........................................................5/6.3 HP @
1500/3000 RPM
Pump Motor
...............................................................................................2
HP @ 1500 RPM
Hydraulic Feed Speed Carriage Adjustable up to
......................................10 m. /min (33 ft/min)
Fast Travel in Gap Section
........................................................................15
m. /min (49 ft/min)
Fast Back Travel
......................................................................................15
m. /min (49 ft/min)
Hydraulic Tracer Control Unit
.....................................................................100
mm (4”) Travel
STANDARD ACCESSORIES
Steadyrest w/Interchangeable Sockets
...................................................Ø 20, 30, 40 & 50 mm
Steadyrest for Square w/Interchangeable Sockets
........................................Ø 60, 70 & 80 mm
Special Steadyrest for Long Spindles
Steadyrest Double Point and Calpe knife
Conic Sockets for Tailstock
.................................................................................Ø
8 & 14 mm
Template for Main
Shaft.....................................................................................Ø
18 & 28 mm
Tenonning Device
System Greaser & Maintenance Tools
OPTIONAL ACCESSORIES
Manual Advance Face Plate Attachment
Hydraulic Advance Face Plate Attachment
Bent Leg Attachment
Copying Attachment for Fluting
Manual Indexing Attachment
Hydraulic-Automatic Tenonning Device System
Square Steadyrest Ø 90 mm
Suction Hood
2nd Hydraulic Tracer Control unit w/100 mm Travel
PACKAGING
3200 x 1100 x 1540 mm
5.3m3
1825 Kg Gross Weight
126” x 43” x 61”
17.38 cu ft
4024 Lbs Gross Weight
|
